KING 3D Printed Agera Putter
The KING Agera putter is our highest MOI putter at 7540. It features an oversize mallet shape, and a multi-material construction utilizing a 3D printed nylon insert, aluminum, tungsten weights, and SIK Face Technology to create our most stable and forgiving putter in the 3D Printed family.
*Also available in ONE Length (37.5") for players who prefer a taller posture at address to promote consistency and help relieve back pain.

Agera
We partnered with HP to design the first family of 3D printed multi-material putters to take MOI and stability to the next level. The KING Agera putter features an oversize mallet shape, and a multi-material construction using a 3D printed nylon lattice, forged aluminum, tungsten, and SIK Face Technology to create our most forgiving putter in the family.
OFFERINGS & HOSEL TYPE
The KING 3D Printed Agera is our most forgiving and stable putter shape. It is available in a standard, ONE Length, and armlock configuration to suit a variety of putting strokes.

3D PRINTED AGERA
HOSEL: SINGLE BEND
LENGTH(S): 34", 35"
TOE HANG: 0°
STROKE/PLAYER TYPE: Straight back and straight through putting strokes

3D PRINTED AGERA ONE LENGTH
HOSEL: SINGLE BEND
LENGTH(S): 37.50"
TOE HANG: 0°
STROKE/PLAYER TYPE: For players with straight back and straight through strokes that desire a taller posture at address.

3D PRINTED AGERA ARMLOCK
HOSEL: SINGLE BEND
LENGTH(S): 41"
TOE HANG: 0°
STROKE/PLAYER TYPE: A armlock single bend setup promotes the most consistent stroke for players that like to rest the grip and shaft against their lead forearm.
Agera Tech
An intricate 3D printed nylon lattice cartridge optimizes the weight distribution within the putter head to create the highest MOI possible for more consistent and predictable rolls.

A 261g steel chassis lowers the center of gravity and adds structural stability to support the other components.

A lightweight 27g forged aluminum crown creates discretionary weight to position more mass around the perimeter to increase MOI.

53 grams worth of tungsten weighting is combined in the forward and rear heel and toe extremeties to maximize stability on off-center putts for increased consistency.



We partnered with SIK Golf and Bryson Dechambeau to design the most accurate putter face possible. Each aluminum face insert features SIK Golf's patented Descending Loft Technology (DLT) that utilizes four descending lofts to ensure the most consistent roll and launch angle for a variety of putting strokes and attack angles.

SIK Golf's patented Descending Loft Technology (DLT) produces a consistent launch of 1.5 degrees for every type of stroke. Whether you have an ascending, neutral or descending attack angle, every putt will have a consistent launch and trajectory.

Each putter is equipped with a Cobra Connect Smart Grip and an embedded sensor that syncs with the Arccos Caddie app on your smart device. Download Arccos Caddie to pair your putter and start receiving in-depth, strokes gained analysis. With the purchase of every putter, you will receive a FREE 45-day trial to Arccos Caddie and the opportunity to redeem additional sensors for the rest of your clubs!





Model | Hosel | Loft Angle | Lie Angle | Toe Hang | Length (With ARCCOS) | Length (Std - Non ARCCOS) | Head Weight | RH/LH |
---|---|---|---|---|---|---|---|---|
AGERA | Single Bend | 4°, 3°, 2°, 1° | 70° | 0° | 34.00" | 33.75" | 385g | RH |
AGERA | Single Bend | 4°, 3°, 2°, 1° | 70° | 0° | 35.00" | 34.75" | 385g | RH |
AGERA ONE Length | Single Bend | 4°, 3°, 2°, 1° | 70° | 0° | 37.50" | 37.25" | 385g | RH |

Model | Tip Size | Shaft Weight |
---|---|---|
KBS 120 PUTTER | .370 | 120g |
Cobra Lamkin Sinkfit Straight Connect (99g)
SuperStroke Traxion Tour 2.0 (55g)
